Other Products ｜BEF-2.1/2-FSB-6 FOUR POINT BEAM END FITTINGS

The Caldwell Model BEF-FSB Beam End Fittings are designed to convert a Model 34 spreader beam into a 4-point spreader beam system. These fittings allow users to build a customized lifting beam using customer-supplied pipe and rigging components.
The system is intended for flexibility in industrial lifting applications where adjustable spread configurations and hoist ring compatibility are required.
When assembled correctly using specified materials, the system is designed to meet applicable ASME lifting standards.

Product Purpose / Function

Converts Model 34 into a 4-point spreader beam
Enables custom beam construction using pipe and fittings
Works with hoist rings for flexible rigging setups
Designed for engineered lifting applications

Key Features

Build-your-own spreader beam system
Designed for hoist ring compatibility
Flexible configuration for multiple lift setups
Supports 4-point lifting stability
ASME-compliant when properly assembled
Uses standard Schedule 40 pipe (customer supplied)

Supported Model Base System

Caldwell Model 34 Spreader Beam

Knock-down style spreader beam platform
Used as the base system for BEF-FSB fittings
Designed for modular expansion

Capacity Information (Important)
Capacity depends on:

Pipe size used (Schedule 40 A53 Grade B)
Assembly configuration
Rigging angle (typically based on 45° minimum top rigging angle)

Typical system capacities vary by configuration and can range across:

6 ton configurations
9 ton configurations

End Fitting Options (BEF-FSB Series)
Common configurations include:

BEF-2 1/2-FSB series
BEF-5-FSB series
BEF-8-FSB series

Each corresponds to different pipe diameters and load ratings.

Pipe Requirements (Critical Spec Section)
The system requires Schedule 40 A53 Grade B pipe:

BEF-2 1/2 → 2.5" nominal pipe
BEF-5 → 5" nominal pipe
BEF-8 → 8" nominal pipe

Pipe requirements:

Must be straight within 1/4" end-to-end
Ends must be square cut
No weld irregularities
Holes must be drilled precisely through both walls
Must meet assembly instructions included with fittings

Hardware Requirements

Grade 5 hex head cap screws
Specific bolt lengths depending on model size
Bolts secure pipe to end fittings

Applications

Steel fabrication shops
Heavy manufacturing
Structural steel handling
Industrial lifting operations
Construction lifting systems
Plant maintenance
Equipment installation

Design Notes

Designed for modular beam construction
Allows field customization of spread lengths
Works as part of a larger Caldwell BEF system
Built for engineered below-the-hook lifting

Compliance

Designed to comply with ASME B30 lifting standards

Must be assembled per Caldwell engineering specifications to remain compliant

Documentation Included

Assembly instructions (included with fittings)
Load rating charts (based on configuration)
Pipe specification requirements
Engineering guidance for assembly

Key Engineering Concept
This system is not a finished beam by itself — it is a component system that becomes a certified lifting beam only when:

Correct pipe is used
Proper rigging is installed
Assembly instructions are followed exactly
Load angles and capacities are respected

If you want, I can next:

turn this into a Shopify collection page (SEO optimized, no H1 as required)

or standardize all Caldwell lifting beams into a single template system for your store (so every page is consistent + ranks better)

or build a comparison chart: Model 22 vs Model 34 vs BEF systems
Brand:CaldwellSKU:34-3401Tags:Free Shipping, Spreader Bars / BeamsCapacity:6 Tons, 9 Tons