Check stock after changing quantityOn the Inspiration List｜ Other Products ｜Grabo Pro-Lifter 20 Suction Cup
【COL-0bf2150e2f97a7f678d01720664d73d03ae946db】
| Category | Other Products / General Merchandise / Other Products |
|---|
| 90.00 USD |
Recommended Other Products products
Customers who viewed this item also viewed
- 32.70 USD
- 56.98 USD
- 11.99 USD
Product description
GRABO Pro is equipped with a robust vacuum pump.
The foam rubber vacuum seal on the GRABO Pro tool is strong and resistant to loss of vacuum pressure. Once the pressure pump is activated, it creates a strong suction and firmly attaches to any non-porous flat surface. The suction is strong enough to hold firm even loads as heavy as 375 lbs. In order to lift any slab of flat solid material, simply turn on the unit and place it straight on the surface. The GRABO Pro automatically monitors the vacuum and if vacuum pressure is lost the pump is automatically powered up until the vacuum pressure is restored.
The GRABO Pro-Lifter is designed for professionals. Unlike the other gigantic solutions, the tool is portable and handy. Living up to the promise of “Heavy Lifting – Made Easy”, the GRABO Pro is equally effective on smooth as well as coarse surfaces. The Pro-Lifter has a pumping capacity of 20 liters per minute, a best in class. So, say good-bye to unreliable, and often dangerous, manual suction cups for the job. With GRABO Pro you double your work efficiency with enhanced safety.
The tool is ergonomically designed to provide better grip and less fatigue when moving heavy objects. The tool is an effective vacuum lifter even for dusty, semi-porous or rough surfaces. The tool works perfectly with glass, wood, ceramic tiles, metals and other materials. Just like the Classic version the powerful vacuum pump and rechargeable battery pack are concealed within the grab handle.
Model/SKU
GRABO PRO-LIFTER 20 / GP-1Li-FB
Battery
14.8VDC 2600mAh Li-ion
Rated Power
16W
Charger Input Voltage
100-240VAC 50/60Hz
Battery Charging Time
~2hrs
Non-Stop Running Time (Full Charge)
1.5hrs
Running Cycles (On Full Charge)
900 ON-OFF cycles of 10 seconds
Stand-by Mode (Charge Hold)
30 days
Pump Service Life
100000+ ON-OFF cycles / 800+ hrs continuous
Rated Air Flow
0.7cfm (20 L/min)
Maximum Vacuum Rate
11.6Psi (0.8 Bar, 80 kPa)
Maximum Lifting Capacity
375Lbs (170 kg)
L x W x H
11.77 x 7.22 x 4.76” (300 x 184 x 121 mm)
Net Weight (With Battery)
3.2Lbs ( 1.5 kg )
Working Temperature
32°F~140°F ( 0°~60 °C )
Applicable Surface Type
Peak/valley heights less than 0.1” (3mm),arc less than 5°
Additional Features
Pump stops automatically at maximum vacuumrate ( 11.6Psi / 0.8 Bar )
Brand:GraboSKU:GRABOPROTags:inventorytracked, Suction CupsOptions:Unit by Itself, Unit with Hard Case
The foam rubber vacuum seal on the GRABO Pro tool is strong and resistant to loss of vacuum pressure. Once the pressure pump is activated, it creates a strong suction and firmly attaches to any non-porous flat surface. The suction is strong enough to hold firm even loads as heavy as 375 lbs. In order to lift any slab of flat solid material, simply turn on the unit and place it straight on the surface. The GRABO Pro automatically monitors the vacuum and if vacuum pressure is lost the pump is automatically powered up until the vacuum pressure is restored.
The GRABO Pro-Lifter is designed for professionals. Unlike the other gigantic solutions, the tool is portable and handy. Living up to the promise of “Heavy Lifting – Made Easy”, the GRABO Pro is equally effective on smooth as well as coarse surfaces. The Pro-Lifter has a pumping capacity of 20 liters per minute, a best in class. So, say good-bye to unreliable, and often dangerous, manual suction cups for the job. With GRABO Pro you double your work efficiency with enhanced safety.
The tool is ergonomically designed to provide better grip and less fatigue when moving heavy objects. The tool is an effective vacuum lifter even for dusty, semi-porous or rough surfaces. The tool works perfectly with glass, wood, ceramic tiles, metals and other materials. Just like the Classic version the powerful vacuum pump and rechargeable battery pack are concealed within the grab handle.
Model/SKU
GRABO PRO-LIFTER 20 / GP-1Li-FB
Battery
14.8VDC 2600mAh Li-ion
Rated Power
16W
Charger Input Voltage
100-240VAC 50/60Hz
Battery Charging Time
~2hrs
Non-Stop Running Time (Full Charge)
1.5hrs
Running Cycles (On Full Charge)
900 ON-OFF cycles of 10 seconds
Stand-by Mode (Charge Hold)
30 days
Pump Service Life
100000+ ON-OFF cycles / 800+ hrs continuous
Rated Air Flow
0.7cfm (20 L/min)
Maximum Vacuum Rate
11.6Psi (0.8 Bar, 80 kPa)
Maximum Lifting Capacity
375Lbs (170 kg)
L x W x H
11.77 x 7.22 x 4.76” (300 x 184 x 121 mm)
Net Weight (With Battery)
3.2Lbs ( 1.5 kg )
Working Temperature
32°F~140°F ( 0°~60 °C )
Applicable Surface Type
Peak/valley heights less than 0.1” (3mm),arc less than 5°
Additional Features
Pump stops automatically at maximum vacuumrate ( 11.6Psi / 0.8 Bar )
Brand:GraboSKU:GRABOPROTags:inventorytracked, Suction CupsOptions:Unit by Itself, Unit with Hard Case
