Gift Set｜Fleck 9500 Twin Softener Valve With Mechanical Meter｜ Other Products

The Fleck 9500 is a twin tank rugged residential/commercial water softener valve with the standard electromechanical control and mechanical meter. The inlet and outlet is 1.5" for continuous flow rate up to 38 GPM.
Valve Options

Valves are custom built to the size tank it's going on

Features

Fully adjustable, 5-cycle control delivers controlled upflow backwash, downflow brining and slow rinse, rapid rinse, timed brine refill, and downflow service
Backwash capacity handles tanks up to 24" diameter
Solid, lead-free brass* valve body for superior strength and durability
Uses conditioned water for regeneration
Salt and water savings by using 100% capacity of the tank in service before switching to the second tank
Regenerates immediately when needed for continuous soft water
Regenerates with soft water and keeps system clean for optimum operating efficiency and minimum maintenance

Valve Specifications

Valve material: Lead-free brass*
Inlet/Outlet: 1-1/2"
Cycles: 5
Electrical rating: 24 v, 110 v, 200 v - 50 Hz, 60 Hz
Distributor pilot: 1.5" pipe I.D.
Drain line: 1" NPTM
Injector brine system: 1/2" & 3/8"
Mounting base: 4" - 8 UN
Height from top of tank: 7-1/4"

*As defined in the U.S. EPA Safe Drinking Water Act; the product also meets California Proposition 65 Standards
Resources



Fleck 9500 Spec Sheet




Fleck 9500 Service Manual
Brand:Fleck SystemsSKU:145-9500-MM-14Tags:1.5" Valves, Fleck ValvesSelect Tank Size:14 Inch Tank, 16 Inch Tank, 18 Inch Tank, 21 Inch Tank, 24 Inch Tank