Check stock after changing quantityPro-Ject: Vinyl NRS Box S3 (Noise Reduction System)｜ Other Products
【COL-c1b38469b48ad2d83f0e25664c1931fa64b98c00】
| Category | Other Products / General Merchandise / Other Products |
|---|
| 119.70 USD |
Recommended Other Products products
Customers who viewed this item also viewed
Product description
LAB POINTS
vinyl noise reduction system detects and reduces vinyl crackle via algorithmic noise reduction system (NRS)
connect between your phono preamp and amplifier / power speakers
the unit will automatically activate when signal is detected unless bypassed
(2) de-crackling intensity algorithms, can be fine-tuned via front panel knob
instant feedback via front panel LED
24-bit DSP / 96 kHz sampling rate for precise processing
line-level operation
full aluminum housing
available in silver or black
"Connect the output of your phono preamplifier to the Vinyl NRS Box S3. First, the line signal gets digitized with a bit depth of 24-bits and a sampling rate of 96 kHz. If the input is too loud, the overflow LED will show it to you. You can then activate the -6 dB switch and the gain is fine now. Crackling parts can be reduced by up to 8 dB which is a big improvement for the listening experience. You can easily adjust the sensitivity with the potentiometer on the front. If you don‘t want to use the De-Crackling function, just turn the potentiometer completely to the left and the algorithm is in bypass." - Pro-Ject
TECH SPECS
Internal sampling: 96 kHz/24 bits
Internal processing: 56-bit accumulator, double precision
Frequency response 20Hz to 20 kHz: -0,6 dB / +0,1dB
Frequency response 30Hz to 20 kHz: -0,2 dB / +0,1dB
Clip indication: -0,6 dB below real clipping
Bypass mode: galvanic linked together (Rlink<0,3 ohm)
THD: <0,009% (500 mVrms Input Level)
VNRS noise/rumble reduce: up to 8dB (20Hz to 20 kHz)
De-Click reduce (basic): 8 dB (3kHz to 20 kHz)
De-Click reduce (intensity): 12 dB (2kHz to 20 kHz)
Outboard power supply: 18V/500mA DC, suitable for your country's mains
supply
Power consumption in standby: 0W OFF/Standby, 2.2W ON (without outboard power supply)
Dimensions: WxHxD: 4" x 1.5" x 4" / 103 x 37 x 104 mm
Weight: 0.75 lbs / 340 g
COMES WITH
power supply
Brand:Pro-JectCategory:_STEREO-COMP-preampSKU:eq-1753Tags:Gift Guide - Gear + Equipment, Levels, Pro-Ject Accessories, Pro-Ject Audio Componentstype:Black, Silver
vinyl noise reduction system detects and reduces vinyl crackle via algorithmic noise reduction system (NRS)
connect between your phono preamp and amplifier / power speakers
the unit will automatically activate when signal is detected unless bypassed
(2) de-crackling intensity algorithms, can be fine-tuned via front panel knob
instant feedback via front panel LED
24-bit DSP / 96 kHz sampling rate for precise processing
line-level operation
full aluminum housing
available in silver or black
"Connect the output of your phono preamplifier to the Vinyl NRS Box S3. First, the line signal gets digitized with a bit depth of 24-bits and a sampling rate of 96 kHz. If the input is too loud, the overflow LED will show it to you. You can then activate the -6 dB switch and the gain is fine now. Crackling parts can be reduced by up to 8 dB which is a big improvement for the listening experience. You can easily adjust the sensitivity with the potentiometer on the front. If you don‘t want to use the De-Crackling function, just turn the potentiometer completely to the left and the algorithm is in bypass." - Pro-Ject
TECH SPECS
Internal sampling: 96 kHz/24 bits
Internal processing: 56-bit accumulator, double precision
Frequency response 20Hz to 20 kHz: -0,6 dB / +0,1dB
Frequency response 30Hz to 20 kHz: -0,2 dB / +0,1dB
Clip indication: -0,6 dB below real clipping
Bypass mode: galvanic linked together (Rlink<0,3 ohm)
THD: <0,009% (500 mVrms Input Level)
VNRS noise/rumble reduce: up to 8dB (20Hz to 20 kHz)
De-Click reduce (basic): 8 dB (3kHz to 20 kHz)
De-Click reduce (intensity): 12 dB (2kHz to 20 kHz)
Outboard power supply: 18V/500mA DC, suitable for your country's mains
supply
Power consumption in standby: 0W OFF/Standby, 2.2W ON (without outboard power supply)
Dimensions: WxHxD: 4" x 1.5" x 4" / 103 x 37 x 104 mm
Weight: 0.75 lbs / 340 g
COMES WITH
power supply
Brand:Pro-JectCategory:_STEREO-COMP-preampSKU:eq-1753Tags:Gift Guide - Gear + Equipment, Levels, Pro-Ject Accessories, Pro-Ject Audio Componentstype:Black, Silver
