Diamond Cutting Blade 1A1R Edge Dry (Set of 3)｜ Other Products

45° is easy!
Cutting ceramic tiles at the 45-degree angle, also known as miter cutting, is the most common operation in finishing works. Many craftsmen perform it manually with an angle grinder. Diamond blades requirements: sufficient body rigidity with soft cutting concurrently, the possibility of grinding the edge.
There are the exact qualities that offered the Edge Dry blade. A wide 25 mm double-sided diamond layer reinforces the body and makes it rigid. A diamond-bearing bond with a honeycomb layer pattern makes your cutting soft and highly productive simultaneously. The large plane creates a fulcrum effect, directing the blade in a straight line. Additionally, you can grind the edge of the tile end.
With a blade like this, the 45-degree angle miter cutting is a pure pleasure!
The blade is available with a diameter of 125 mm, and a mounting seat of 22.2 mm. Used on angle grinder without the use of coolant.

Diameter
Thickness
Cooling
Bore Diameter
Miter Cutting 45°
Purpose

4.5 in
1.6
Without cooling
22.23
Yes
Ceramic, Porcelain gres

5 in
1.6
Without cooling
22.23
Yes
Ceramic, Porcelain gres

Useful Information
When cutting porcelain gres, especially with a 45-degree miter cut, it is worth choosing an angle grinder with at least 1.2 kW power capacity. The higher the power is, the more stable and productive the process.
Brand:DistarSKU:11115546009Tags:Porcelain / Tile BladesDiameter:4.5", 5"