K-Set Non-Corrosive, Non-Chloride Accelerating Admixture｜ Other Products

K-Set is a non-corrosive, non-chloride accelerating admixture that speeds concrete setting time and boosts early strength
K-Set contains no calcium chloride, avoiding the corrosive effects that chloride-based accelerators have on reinforcing steel. It's formulated for cold weather use or anywhere reduced setting time, higher early strength, and improved workability are needed.
Key Features & Benefits

Non-corrosive — contains no calcium chloride
Accelerates cement hydration for shorter setting times and high early strength
Improves workability and helps prevent segregation
Aids early stiffening for mortar and stucco mixes
Shortens setting times by one to three hours
Helps protect against freezing by accelerating early strength gain
VOC compliant; meets ASTM C494 and ASTM C270

Application Instructions

Add K-Set to water, sand, or the complete mix — do not add to dry cement or let it contact other additives before entering the mortar
For masonry cement, add 10-25 oz per bag depending on the degree of acceleration needed
For Portland cement, add 18-46 oz per bag
Determine the exact rate by testing the actual job materials
Decreases water requirements by approximately 4-8%

Packaging
Available in 5-gallon pails (pack of 6) and 55-gallon drums.
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:KSET-5Tags:Cementitious Products and LiquidsSize:5 Gallon (Pack of 6), 55 Gallon